Switch & Blind Actuators (DIN Rail)
For the DIN rail in the distribution board: switch actuators from 4 to 28 channels and blind actuators up to 14 channels. One product line, consistent logic – from single-family homes to hotel corridors.
- Switch actuators with 4, 8, 12 and 28 channels · 10 A or 20 A
- Blind actuators with 4 and 14 channels
- Combo actuator: 28 channels with 28 binary inputs
Flush-Mounted Actuators with Binary Inputs
Retrofit without a new distribution board: the flush-mounted actuators sit right in the wall box behind the push button and come with binary inputs built in – ideal for renovations and hotel refurbishments.
- 1, 2 and 3 channels · 10 A · each with 6 binary inputs
- 2-channel flush-mounted blind actuator with 6-channel binary input
- 1-channel flush-mounted dimming actuator with 6 binary inputs
Dimming Actuators
Clean dimming for any lighting design: 230 V dimming actuators up to 4×300 W, 1–10 V dimmers for ballasts and RGB dimmers for coloured LED light.
- 4-channel 230 V dimming actuator, 4×300 W
- 4-channel dimmer, 1–10 V
- KNX LED dimmer RGB
Binary Inputs
Bring conventional switches, contacts and detectors onto the bus: the compact binary inputs disappear into the wall box and can drive status LEDs if needed.
- 6-channel input with 8 LED outputs
- 8-channel input with 8 LED outputs
- Compact housing for the flush-mounted wall box
KNX Power Supply
The foundation of every KNX line: the LETOUR power supply delivers up to 960 mA – plenty of headroom even for fully loaded lines with panels and touch push buttons.
- 960 mA bus current, DIN-rail housing
- Status LEDs for at-a-glance diagnostics